I have various parts for Delta Wing gliders. Here is a partial list:

AN bolts

Sizes= 5/16" about 4 1/16 " long (AN5-40) and 4 3/16 " long (AN5-41) I have some long 1/4" as well, and some AN4-32 plus others

Stainless steel nose catch channels

Aluminum "chicken catch" nose catch piece

Top rear wire catch and channel

3/8 diameter Insta-bushings in lengths: 1 9/16", 1 5/8", 1 3/4"

Tube end caps 1 1/2", 1 5/8", 1 3/4", 1 7/8", and 2" OD tubes

Plastic saddles

1/4-28 wing nuts

Rib tips for 3/8" and 1/2" tubes

Heavy-duty stainless "yacth" thimbles for 3/32" and 1/8" cable

Clevis pins sizes= 3/16" around 2" long plus and minus

Nose plates

Cross spar plates

Cross spar pivot arms

Top downtube brackets

Bottom control bar U-brackets

Protective plastic nut and bolt-head caps